I have installed the thinger.io latest library, I am using the NodeMCU example. The default example does not compile with the library. Below is the failure.
Arduino: 1.8.15 (Mac OS X), Board: “NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Disabled (new aborts on oom), Disabled, All SSL ciphers (most compatible), 32KB cache + 32KB IRAM (balanced), Use pgm_read macros for IRAM/PROGMEM, 4MB (FS:2MB OTA:~1019KB), 2, v2 Lower Memory, Disabled, None, Only Sketch, 921600”
In file included from /Users/dipak.patil/Documents/Arduino/libraries/thinger.io/src/ThingerWifi.h:27,
from /Users/dipak.patil/Documents/Arduino/libraries/thinger.io/src/ThingerESP8266.h:28,
from /Users/dipak.patil/Documents/Arduino/libraries/thinger.io/examples/ESP8266/NodeMCU/NodeMCU.ino:1:
/Users/dipak.patil/Documents/Arduino/libraries/thinger.io/src/ThingerClient.h: In member function ‘virtual bool ThingerClient::read(char*, size_t)’:
/Users/dipak.patil/Documents/Arduino/libraries/thinger.io/src/ThingerClient.h:128:45: error: call of overloaded ‘abs(long unsigned int)’ is ambiguous
128 | if(read<=0 && abs(millis()-start)>=DEFAULT_READ_TIMEOUT){
| ^
In file included from /Users/dipak.patil/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.0-newlib4.0.0-gnu23-48f7b08/xtensa-lx106-elf/include/c++/10.2.0/cstdlib:75,
from /Users/dipak.patil/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.0-newlib4.0.0-gnu23-48f7b08/xtensa-lx106-elf/include/c++/10.2.0/stdlib.h:36,
from /Users/dipak.patil/Library/Arduino15/packages/esp8266/hardware/esp8266/3.0.0/cores/esp8266/Arduino.h:27,
from sketch/NodeMCU.ino.cpp:1:
/Users/dipak.patil/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.0-newlib4.0.0-gnu23-48f7b08/xtensa-lx106-elf/include/stdlib.h:74:5: note: candidate: ‘int abs(int)’
74 | int abs (int);
| ^~~
In file included from /Users/dipak.patil/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.0-newlib4.0.0-gnu23-48f7b08/xtensa-lx106-elf/include/c++/10.2.0/cstdlib:77,
from /Users/dipak.patil/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.0-newlib4.0.0-gnu23-48f7b08/xtensa-lx106-elf/include/c++/10.2.0/stdlib.h:36,
from /Users/dipak.patil/Library/Arduino15/packages/esp8266/hardware/esp8266/3.0.0/cores/esp8266/Arduino.h:27,
from sketch/NodeMCU.ino.cpp:1:
/Users/dipak.patil/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.0-newlib4.0.0-gnu23-48f7b08/xtensa-lx106-elf/include/c++/10.2.0/bits/std_abs.h:79:3: note: candidate: ‘constexpr long double std::abs(long double)’
79 | abs(long double __x)
| ^~~
/Users/dipak.patil/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.0-newlib4.0.0-gnu23-48f7b08/xtensa-lx106-elf/include/c++/10.2.0/bits/std_abs.h:75:3: note: candidate: ‘constexpr float std::abs(float)’
75 | abs(float __x)
| ^~~
/Users/dipak.patil/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.0-newlib4.0.0-gnu23-48f7b08/xtensa-lx106-elf/include/c++/10.2.0/bits/std_abs.h:71:3: note: candidate: ‘constexpr double std::abs(double)’
71 | abs(double __x)
| ^~~
/Users/dipak.patil/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.0-newlib4.0.0-gnu23-48f7b08/xtensa-lx106-elf/include/c++/10.2.0/bits/std_abs.h:61:3: note: candidate: ‘long long int std::abs(long long int)’
61 | abs(long long __x) { return __builtin_llabs (__x); }
| ^~~
/Users/dipak.patil/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.0-newlib4.0.0-gnu23-48f7b08/xtensa-lx106-elf/include/c++/10.2.0/bits/std_abs.h:56:3: note: candidate: ‘long int std::abs(long int)’
56 | abs(long __i) { return __builtin_labs(__i); }
| ^~~
exit status 1
Error compiling for board NodeMCU 1.0 (ESP-12E Module).
This report would have more information with
“Show verbose output during compilation”
option enabled in File → Preferences.
